Assembly adhesive

High-quality adhesive solution providing zero slip, ideal for installing natural or artificial stones, decorative bricks and ceramic tiles on walls.

Make sure that the surface is clean, free of dust, loose materials and not oily.
Mix 6-7 liters of clean water per bag weighing 25 kg with an electrical drill at low speed/rpm.
Allow the mixture to mature for 5-10 minutes and then mix again without adding water.
Spread adhesive evenly on the surface with a notched spatula.
Set the stone within 20 minutes after applying the glue.
Recommended temperature: + 5 ° C to + 30 ° C.
Do not use glue in extreme frost or heat.

Approximately 2-4 kg/m², depending on the surface

Paper bag 25 Kg

Store in its original hermetic packaging, in roofed area protected from frost and moisture for up to 12 months after production date.

Two-component adhesive mortar, ideal for natural and artificial stone, decorative bricks, ceramics tiles, etc., for use on floors and walls. Ideal for heated surfaces (walls, floors, etc.), moving surface like gypsum boards, cement boards, wood, etc., as well as glass bricks. Exhibits excellent behavior in adherence and presents great elasticity.
Produced in six colors: white, beige, gray, brown, red, black.

In the liquid agent (component B) add the mortar while mixing with an electrical drill at low rpm. If you wish the adhesive to become more fluid or more jelly like, add or remove the necessary quantity of the mixing agent.

Approximately 4-5 kg/m², depending on the surface

Carton box 20 Kg
Component Α: 15 Kg (mortar)
Component B: 5 Kg (resin)

Store in its original hermetic container, in areas protected from frost.